Busses From Controllers First clients on Bus Second tier of clients on Bus
1 Address range 2 3
this is d0server4/projects/TriggerElectronics/Locations&Cables/Cable_Spreadsheets/RT_channels_<date>.xls

last updated:    2007-08-23 sg controllers added, AFE PS RMs and CTT crates moved
                                             to their own buses; d0olctl55 replaced by 134
                       2004-10-15 sg added FPD; removed CTM (is on L1MUON bus);                                       
                                            added DFEB in PW02
                       2003-10-31 SG printed labels; file moved;
                                         some cable moves; FPD and AFE LVPS RM added 
                       2001-11-17 no cabling changes; new processor names; added ports; 
                                        added comments     
                       2001-10-18 SG added even more and longer labels
                       2001-10-16 SG distribute buses over two (2) processors
                                              swapped 1553 connections for  DFE PC03 top and MB
                                              (MB has built-in backplane terminator)
                                              moved north Sequencer controller to Sequencer bus
                       2001-6-28 SG bus 2 & bus 13 labels
    new printed labels in MCH300 handwritten labels
  Bus
 Node 0 Address 0-23
74D     AFE 1a/1b/2a
D0olctl134    
   
t-d0-mch3 1 Address 0-23
port 10     AFE 2b/3a/3b
     
   
  2 Address 0-23
      AFE 4a/4b/5a
     
    replacement for cable #13      
   
  3 Address 0-23
      AFE 5b/6a/6b
     
   
  4 Address 0-19 Address 25
      Seq 3b PC04    
    label: #17 (black cable)     legend:        
    CFT-Ax PC04 Sequencers slot 12-21 LVPS behind PC04 for north SEQ & DFE    
      AFE  
    Address 0-19 Address 21    
  5   Seq 3a PC04   from SEQ PC04 cable #18 to SEQC PC04   RM/RMI for power control
    label: #18 (black cable)        
    CPS PC04 Sequencers slot 1-10 PC04 Sequencer Controller     Crate Controller for DFE Crate
       
  6 Address 8-15 Address 0-7 Address 16-23   SEQ/DFE PS control  
      AFE 7b/7a/14   AFE 7b to 7a   7a to FPD PW08    
    AFE Cr 7b (via PC20 cable connection) AFE Cr 7a AFE crate 14 = FPD   Sequencer (half) crate  
       
  7 Address 25   Address 26   changes from previous version
      RM between 03/04 label: DFE PC to RM between 19 & 20
    Rack mon PC04 Rack Monitor
for PC03 & PC04
   
   
  Bus
 Node   Address 0-23
74E 0   AFE 8a/8b/9a
D0olctl58    
   
t-d0-mch3   Address 0-23
port 42 1   AFE 9b/10a/10b
     
     
    Address 0-23
  2   AFE 11a/11b/12a
     
   
    Address 0-23
  3   AFE 12b/13/a13b
     
   
    Address 0-19 Address 21
  4   Seq 5a PC19   short jumper cable
    label: #3 (black cable)  
    CFT-St PC19 left half Sequencer Boards PC19 Sequencer Controller
   
    Address 0-19
  5   Seq 5b PC19
    label: #4 (black cable)
    FPS PC19 right half Sequencer Boards
   
      Address 25-27  
  6   label C  
      AFE RMs in PE03  
      25 = PS 1&2, 26=PS3&4, 27=PS 5&6  
     
      Address 25-28  
  7   label E  
      AFE Rack Monitors in  PW02  
      25=CTT_LVMT_MTM&PS8,26=PS9&A,  
      27=PS B&C,28=PS 7&D  
     
  8   Address 27   Address 25,26   Address 24  
       'B' to AFE bp 12a; 'AFE 12a - PW03'   RM PW02; RM PW03   jumper cable  
      DFE in PW03 top Cr1   25=RM&RMI PW03, 26=RM DFEB PS control   DFE in PW03 bottom Cr2  
     
      Address 24   Address 26   Address 27   Address 25  
  9   label: 'D';   AFE 4&5a to MB in PC04', 'AFE 3b to DFE in PC20'   no label (short jumper cable)   DFE PC19 to RackMon behind PC19  
      MB in PC04 Cr2   DFE in PC20 Cr2   DFE in PC19 Cr2   LVPS behind PC19 for south SEQ & DFE