Calorimeter Signals
Signal shapes measured on modified BLS-card using
Tektronix Scope with Ethernet link
5k
pulser – long (eps)
5k
pulser – short (eps)
detector
pulser (preamp, trigger-shaper, shaper, trigger out)
DAC=1k C/8 A/6 B/0 T/2 D/3 – csv/xls file – txt file
detector
pulser (preamp, trigger-shaper, shaper, trigger out)
DAC=2k C/8 A/6 B/0 T/2 D/3 – csv/xls file – txt file
detector
pulser (preamp, trigger-shaper, shaper, trigger out)
DAC=5k C/8 A/6 B/0 T/2 D/3 – csv/xls file – txt file
detector
pulser (preamp, trigger-shaper, shaper, trigger out)
DAC=10k C/8 A/6 B/0 T/2 D/3 – csv/xls file – txt file
detector pulser–
(preamp, trigger-shaper, shaper, trigger out)
DAC=25k C/8 A/6 B/0 T/2 D/3 – csv/xls file – txt file
detector
pulser (preamp, trigger-shaper, shaper, trigger out)
DAC=50k C/8 A/6 B/0 T/2 D/3 – csv/xls file – txt file
detector
pulser (preamp, trigger-shaper, shaper, trigge r out)
DAC=100k C/8 A/6 B/0 T/2 D/3 – csv/xls file – txt file
detector
pulser (preamp, trigger-shaper, shaper, trigger out)
DAC=130k C/8 A/6 B/0 T/2 D/3 – csv/xls file – txt file
detector
pulser – (preamp, shaper, trigger shaper)
DAC=25k C/9 A/3 B/6 T/2 D/3 – csv/xls file
detector
pulser had (preamp, trigger-shaper)
DAC=25k C/8 A/6 B/0 T3/ D/8 – csv/xls file
detector
pulser had (preamp, shaper, trigger-shaper)
DAC=25k C9 A/3 B/6 T/3 D/8 – csv/xls file
Scope installed in C/8 A/6 B/0 T/2 D/3 - em. channel:
detector
data 0 (ps) (preamp, trigger-shaper, trigger out)
detector
data 01 (preamp, trigger-shaper,
shaper, trigger out) – csv
file – xls
file
detector
data 02 (preamp, trigger-shaper,
shaper, trigger out) – csv
file – xls
file – txt
file
detector
data 03 (preamp, trigger-shaper,
shaper, trigger out) – csv
file – xls
file – txt
file
detector
data 04 (preamp, trigger-shaper,
shaper, trigger out) – csv
file – xls
file – txt
file
detector data 06 (preamp, trigger-shaper, shaper, trigger out)
– csv
file – xls
file – txt
file
detector
data 07 (preamp, trigger-shaper,
shaper, trigger out) – csv
file – xls
file – txt
file
detector data 08 (preamp, trigger-shaper, shaper, trigger out)
– csv
file – xls
file – txt
file
detector data 09 (preamp, trigger-shaper, shaper, trigger out)
– csv
file – xls
file – txt
file
detector data 10 (preamp, trigger-shaper, shaper, trigger out)
– csv
file – xls
file – txt
file
detector data 11 (preamp, trigger-shaper, shaper, trigger out)
– csv
file – xls
file – txt
file
Scope
installed in C/9 A/3 B/6 T/3 D/8 – had. channel:
detector
data had 00 (preamp, trigger-shaper,
shaper, trigger out) – csv
file – xls
file
detector
data had 01 (preamp, trigger-shaper,
shaper, trigger out) – csv
file – xls file
detector data had 02 (preamp, trigger-shaper, shaper, trigger out)
– csv
file – xls
file
detector data had 03 (preamp, trigger-shaper, shaper, trigger out)
– csv
file – xls
file
detector data had 04 (preamp, trigger-shaper, shaper, trigger out)
– csv
file – xls
file
detector data had 05 (preamp, trigger-shaper, shaper, trigger out)
– csv
file – xls
file
Scope
measurements in 5k:
Measurement with scope probe on
different points
Triggered on pulser signal –
xls file
-
PreAmp: on PreAmp board without BLS-card plugged in
-
PreAmp-out: PreAmp board with BLS-card plugged in
Scope picture channel depth D –
3/4/5 tif file, –
6/7/8 tif file, –
9,10,11 tif file
Triggered on BLS-sync signal –
xls file
-
PreAmp in BLS-card: PreAmp input at BLS card
-
Shaper out: shaper output on BLS card
Scope picture
channel depth D –
0/1/2 tif file, –
3/4/5 tif file, –
6/7/8 tif file, –
9,10,11 tif file
PreAmp T0 D0 PreAmp-out,
PreAmp in BLS, Shaper out –
xls file
PreAmp T0 D1 PreAmp-out,
PreAmp in BLS, Shaper out –
xls file
PreAmp T0 D2 PreAmp-out,
PreAmp in BLS, Shaper out –
xls file
PreAmp T0 D3 PreAmp-out,
PreAmp in BLS, Shaper out –
xls file
PreAmp T0 D4 PreAmp-out,
PreAmp in BLS, Shaper out –
xls file
PreAmp T0 D5 PreAmp-out,
PreAmp in BLS, Shaper out –
xls file
PreAmp T0 D6 PreAmp-out,
PreAmp in BLS, Shaper out –
xls file
PreAmp T0 D7 PreAmp-out,
PreAmp in BLS, Shaper out –
xls file
PreAmp T0 D8 PreAmp-out,
PreAmp in BLS, Shaper out –
xls file
PreAmp T0 D8 PreAmp-out,
PreAmp in BLS, Shaper out –
xls file
PreAmp T0 D10 PreAmp-out,
PreAmp in BLS, Shaper out –
xls file
PreAmp T0 D11 PreAmp-out,
PreAmp in BLS, Shaper out –
xls file
Scope
installed on PreAmp Box C/8 PreAmp/0 B/0 T/3 D/3 - em. channel:
pulser
data DAC=3k (preamp, driver, output) –
xls file
signal 1? (preamp, driver, output) – xls file
Test Bench Measurements in
Orsay (courtesy Ronic/Christophe):
Shaper response to a step
function: reference
shaper, old
shapers (G10), new
shaper (ceramic coated/uncoated)
Shaper response to a dirac
function:
reference shaper, old
shapers (G10), new
shaper (ceramic coated/uncoated)
Calibration: input
signal, shaper
response
Physics: Preamp+Driver
output, shaper
response
Spice Models:
Dean’s Model (xls):
detector trigger out type A
– no
cable (trigger, PreAmp)
detector trigger out type A
– no
cable (trigger, PreAmp, Shaper)
detector trigger out type A
– cable
(trigger, PreAmp, Shaper)
detector trigger out type E
– cable
(trigger, PreAmp, Shaper)
pulser trigger out type E
– cable
(trigger, PreAmp, Shaper)
Herve’s Model
(ps): Scheme
Trigger
Output after cable (delayed)
Ronic & Melissa’s Model version 0 (courtesy to Ming):
C-type PreAmps (outer
crates: 0,5,6,11) (Shaper) xls,
txt
C-type PreAmps (inner
crates: 1,4,7,10) (Shaper) xls,
txt
D-type PreAmps (Shaper) xls,
txt
E-type PreAmps (Shaper) xls,
txt
F-type PreAmps (outer
crates: 0,5,6,11) (Shaper) xls,
txt
F-type PreAmps (inner
crates: 1,4,7,10) (Shaper) xls,
txt
Hb-type PreAmps (Shaper) xls,
txt
Ronic & Sergey’s
Model – version 1 (courtesy to Stephanie):
new shaper measurements
(Ronic/Christophe), new reflection measurements
em-channel C8/A6/B0/T2/D3
(PreAmp, Shaper, physics, calibration) xls,
txt
had-channel C8/A6/B0/T3/D8
(PreAmp, Shaper, physics, calibration) xls,
txt
had-channel C9/A3/B6/T3/D8
(PreAmp, Shaper, physics, calibration) xls,
txt
Ronic & Sergey’s Model
– version 2:
including skin effect
PreAmp-BLS
Comparisons:
detector
data/spice model – Mingcheng Gao
detector
data 04/pulser – Ursula Bassler
shaper
comparison Dean’s/Melissa’s Models/data/pulser – Ursula
Bassler
new
shaper comparison Dean’s/Melissa’s/Sergey’s model –
Ursula Bassler
preAmp
comparison Dean’s/Sergey’s model – Ursula Bassler
preamp,
shaper,
calibration
input comparison models, data, test bench measurements – Ursula
Bassler
calibration
input, calibration
preamp, calibration
shaper test bench measurements vs. Mathlab simulation – Ronic Chiche
physics
input, physics
preamp, physics
shaper test bench measurements vs. Mathlab simulation – Ronic Chiche
physics shaper, calibration
shaper vs. simulation v2 – Segey Burdin
5k
signals PreAmps and shaper vs. simulation v2 – Ursula Bassler
For comments/questions contact U.
Bassler
This page last updated March 20, 2002