Interface Module WEB PAGE

Interface Card Production and Testing Status  (updated 02/15/01)

KSU testing detail by interface card serial number (updated 02/15/01)    

Operation of interface cards:

Drawings and Photos: Interface module cards(8-channel design)

Electronics: Interface Module

            Scope traces from KSU teststand board

Page 1 circuit (.ps)

Page 2 (PLD)

Preliminary Cost Estimate (8/13/99) Word doc

Adapter Card Schematics (10/2000)

·        Standard Adapter Card: 80cond 3M to two 1mm Hirose (HEP015 Rev 1.5)

·        Custom jumper card: 80 conductor 3M to one 1mm Hirose + one 40 conductor connector (HEP033Rev 1.2)

·        Custom jumper card: 40conductor to one 1mm Hirose (HEP032, Rev 1.0)

 Temperature Monitoring

Note from Dan Markley 10/5/99

Minutes of meetings:

July 29, '99 (design review #2)

July 15, ' 99

May 13, '99

May 27, '99

 

May 6, '99

April 29 '99

April 22,99

April 8, '99

April 1 '99

Mar 25 '99

 

Useful Documents:

1553 Standard (68pages, pdf)

ABT transceiver data sheets

Comparator data sheets

AD822 Op Amp data sheets

 

OBSOLETE FILES

Rev 3.1 Schematic - updated 8/11/99 pdf OBSOLETE

Rev 1 Project definition (obsolete)

    1. Dimensioned layout
    2. Layout showing buss bars & fuses
    3. Detail of buss bar clamp

 

This page last updated 12/14/00.

R Sidwell , sidwell@fnal.gov