Run II Offline Calibration and Alignment
December, 1998 Milestones

Deadline: Code must be part of the release of January 13, 1999
We will ask for the first release as part of the January 5 release

• All detectors will have base, channel and material geometries debugged and integrated with DØRECO.

  ---

  • General Status
  • SMT: John
  • CFT: Harry
  • CPS: Don, Phil
  • CAL: Steve
  • FPS: Dennis
  • Muon: Nemat, Pushpa, Rick
    • PDT
    • MDT
    • A
    • Pixels
    • Toroids
  • Solenoid: Heidi?

  ---

• A prototype alignment program for at least one detector will be developed which will:
  1. Take tracks found by TRF++
  2. Calculate residuals between those tracks and the detector hits
  3. Use the residuals to create a new, aligned geometry
  4. Verify that new residuals are zero when TRF++ uses new geometry

  ---

  • Smoothing function in global tracking: Harry
  • Infrastructure: Harry
  • CFT: Harry
  • Secondary goal - SMT: Tom, John, Dhiman

  ---

• A prototype calibration program for at least one detector will be developed.

  ---

  • Prototype will use mSQL / døom interface
  • Infrastructure (Calibration Manager, etc): Ela, Vicky?
  • SMT: Ela
    • Calibration constants: pedestals, gains, drift corrections