Combined Testing Status
 Package Version   Updates
(Linux)

(sgi)

 

(nt)

  Material
 geometry_system v01-02-03 OK tested OK  N/A 
 thinshells v00-05-03 OK tested OK  N/A 
 material v00-00-05

OK

 tested

OK

N/A
 silicon_geometry v01-01-03  Warnings tested  OK  P
cft_geometry v01-00-04 Warnings tested*
(Warnings) 		 error P 
cps_geometry  v00-02-04 Warnings tested*
(Warnings) 		 error  A 
fps_geometry  v01-01-02 Warnings tested error A
calorimeter_geometry  v00-01-11 OK  OK error A
muon_geometry  v01-02-11 Warnings  Warnings  error  A 
 mag_field_geometry         A 
 d0_geometry v01-01-01 OK tested  error  P 
 geometry_management v01-00-09 Warnings  tested error  P

Blanks indicate not built.
*The persistance-tests linking was disabled until spacegeom v00-05-02 is available.
**The package needs minor changes to allow running without persistance in the link

The entries for each package/platform combination are defined as:

Errors: errors during lib phase
Warnings: Warnings generated during lib phase
OK: library built without problems. Test target not run or failed
Tested: test programs ran (had to kludge some persistance jobs to get spacegeom _lnk)

As of 12/22/98 only library building has been tested on Linux. The 'test' targets are all failing ( all with the same error message relating to 'libf2c'. This is being worked on.

For MATERIAL, no combined testing has been done. The P(A) merely indicates presence(absence).

For persistance test, you also need spacegeom(v00-05-02). To build it, you also need ctbuild (v02-00-12 will suffice) and ctest(v01-30-03). After doing 'addpkg' for these, you must do 'gmake x.all' for each in which x=ctest and then x=ctbuild. You also must do

setenv CTEST_REPLACES_CTBUILD 1

There is some variation in the pattern used (or not used!) for channel geometries. This is an item for discussion at our next meeting.

This page maintained by John Hobbs
Last Updated, Mar. 29, 1999