DØ Run II Procedures
(last update: 02/02/2012) The procedures listed below are in PDF format. A Microsoft Word 2000 document is available for creating new operating procedures in a standard format. Procedures are dated, and are scheduled to be reviewed (and revised as appropriate) at a maximum interval of five years.
Procedure number format: DØ-Category-System-###	Categories include: EMERG, SAFETY, OP,ELE, MAINT, ADMIN, OTHER Systems include: SOL, SMT, FT, CPS, FPS, CAL, ICD, MU, TRG, DAQ, CRYO, ELEC, MECH, BLDG, GAS, TRAIN, ESH, OTHER
Procedure Number	Title	Status
EMERG [top]
DØ-EMERG-BLDG-001	Fire Alarm - Assembly Building and Collision Hall	Approved-under review
DØ-EMERG-BLDG-002	VESDA Alarms	Approved-under review
DØ-EMERG-BLDG-003	Oxygen Deficiency Hazard (ODH) Alarms	Approved-under review
DØ-EMERG-BLDG-004	Recovery From Alarms and Emergencies	Approved-under review
DØ-EMERG-CRYO-001	Cryogenic Pipe Or Dewar Leak	Approved-under review
DØ-EMERG-ESH-001	Spill Plan	Approved-under review
DØ-EMERG-ESH-002	Potential Radiation Exposure	Approved-under review
DØ-EMERG-OTHER-001	Severe Weather	Approved-under review
SAFETY [top]
DØ-SAFETY-BLDG-001	Search And Secure-Open Configuration	Consult MCR (x3721)
DØ-SAFETY-BLDG-003	Controlled Access-Collision Hall	Consult Tech. Coordinator
DØ-SAFETY-BLDG-004	Supervised Access-Collision Hall	Consult Tech. Coordinator
D Ø-SAFETY-BLDG-006	Search And Secure-Closed Configuration	Consult MCR (x3721)
DØ-SAFETY-BLDG-007	Tours at DZero	Approved-01/31/12
DØ-SAFETY-BLDG-008	Collision Hall Access	Under review
DØ-SAFETY-ELEC-002	Solenoid Fringe Field Survey Controlled Access - DØ Collision Hall	Approved-5/2/2005
DZero Calorimeter Gap Access	Calorimeter Gap Access Rules	Reviewed each gap access
OP [top]
D0-OP-MECH-001	BLS To/From Detector Platform Racks	Approved-10/20/2009
D0-OP-MECH-002	BLS To/From Collision Hall	Approved-10/20/2009
D0-OP-SMT-001	Operation Of Silicon Detector Dry Gas Purge System	Consult Mech Ops (x2849)
D0-OP-SMT-002	Initial Startup Of The D0 Silicon Detector Cooling System	Consult Mech Ops (x2849)
D0-OP-SMT-003	Checking Silicon Detector Cooling System Interlock Functions	Consult Mech Ops (x2849)
D0-OP-SMT-004	Operating The Silicon Detector Cooling System Vacuum Pumps	Consult Mech Ops (x2849)
D0-OP-SMT-005	Operating The Nitrogen Gas Purge System On The Expansion Tank	Consult Mech Ops (x2849)
D0-OP-SMT-006	Filling The Silicon Detector Cooling System	Consult Mech Ops (x2849)
D0-OP-SMT-007	Draining The Silicon Detector Cooling System	Consult Mech Ops (x2849)
D0-OP-SMT-008	Normal Chiller Operation	Consult Mech Ops (x2849)
D0-OP-SMT-009	Swapping Out A Chiller	Consult Mech Ops (x2849)
D0-OP-SMT-010	DØ Silicon Detector Radiation Protection	Approved-under review
D0-OP-ESH-001	Issuing of Temporary Dosimetry Badges at DØ	Approved-04/16/2009
ELE [top]
DØ-ELE-SMT-001	Remove and Replace CFT/SMT Sequencer Power Supply Chassis	Approved-11/16/2007
DØ-ELE-CAL-001	Disconnect/Reconnect BLS Power Supply Chassis	Approved-9/11/2007
DØ-ELE-CAL-002	Remove and Replace Calorimeter Pre-amp Power Supply	Approved-6-28/2007
DØ-ELE-MUO-001	Remove/Replace Muon PDT Power Supplies	Approved-3/10/2010
DØ-ELE-MUO-002	Remove/Replace Level 1 Muon Power Supply Chassis	Approved-8/21/2007
MAINT [top]
ADMIN [top]
DØ-ADMIN-OTHER-001	Creating DØ Procedures	Consult TIC (x6337)
DØ-ADMIN-TRAIN-001	Hazard Awareness Training	Consult ES&H
DØ-ADMIN-TRAIN-002	Controlled Access Training	Consult ES&H
DØ-ADMIN-TRAIN-003	Radiological Worker Training	Consult ES&H
DØ-ADMIN-TRAIN-004	LOTO 1 Training	Consult ES&H
OTHER [top]
	Procedures for Researchers	28-Jan-2010
	Site Access via East Gate (between 0100 and 0500) for Operational Issues	12-Jan-2010